SKU: Infinity 3 Categories: , ,

$799.00

Availability: In stock (can be backordered)

Pigtronix Infinity 3 Looper Pedal

Pigtronix Infinity 3 Looper Pedal – Equal parts performance tool and songwriter’s sketchbook, the Pigtronix Infinity 3 looper pedal is destined to become a permanent part of your live, rehearsal, and studio workflow. With this next-level looper, you can harness two independent stereo or split mono loops to toggle verse/chorus accompaniment in a live setting. Each loop includes its own level control, so you can build dynamic mixes based on the way you play. You can also pull from a bank of 50 of your own pre-recorded loops (up to 3 hours in total length) to access instant inspiration anywhere you write or play out. As with all Pigtronix pedals, the Infinity 3 looper spares no expense when it comes to features or signal path. Plus, 24-bit/48kHz stereo recording with discrete analog limiter stages and a transparent analog audio pass-through makes this pedal every ounce as choosy as your boutique pedal fleet. Features that further distinguish the Infinity 3 include stereo I/O to capture stereo delays on reverbs on the way in and out, a 24kHz/12kHz switch to give parts a 3-octave reach, an extremely responsive Sync Multi loop capture, and a 5-pin MIDI out with clock jitter correction for simpler integration with DAWs, drum machines, and more. The bottom line? The Pigtronix Infinity 3 is dual-looper pedal that’s all-in on sound, speed, and ease of use.

Pigtronix Infinity 3 Looper Pedal

Pigtronix Infinity 3 Looper Pedal – Equal parts performance tool and songwriter’s sketchbook, the Pigtronix Infinity 3 looper pedal is destined to become a permanent part of your live, rehearsal, and studio workflow. With this next-level looper, you can harness two independent stereo or split mono loops to toggle verse/chorus accompaniment in a live setting. Each loop includes its own level control, so you can build dynamic mixes based on the way you play. You can also pull from a bank of 50 of your own pre-recorded loops (up to 3 hours in total length) to access instant inspiration anywhere you write or play out. As with all Pigtronix pedals, the Infinity 3 looper spares no expense when it comes to features or signal path. Plus, 24-bit/48kHz stereo recording with discrete analog limiter stages and a transparent analog audio pass-through makes this pedal every ounce as choosy as your boutique pedal fleet. Features that further distinguish the Infinity 3 include stereo I/O to capture stereo delays on reverbs on the way in and out, a 24kHz/12kHz switch to give parts a 3-octave reach, an extremely responsive Sync Multi loop capture, and a 5-pin MIDI out with clock jitter correction for simpler integration with DAWs, drum machines, and more. The bottom line? The Pigtronix Infinity 3 is dual-looper pedal that’s all-in on sound, speed, and ease of use.

No tap dancing required

The Pigtronix Infinity 3 offers incredible functionality for live looping. Using its adaptive Sync Multi option, most actions you trigger are automatically applied at the boundaries of the current loop. This eliminates the need for spot-on timing to switch between loops or stopping your loop at the correct time. You’ll be surprised by the way the Infinity 3 turbocharges your workflow and makes it easy to build full songs. This makes looping as natural as tapping your foot along to the beat!

Stereo I/O with room to grow

The Pigtronix Infinity 3 is chock full of ins, outs, and expression jacks to support your workflow. The stereo inputs and outputs integrate this looper nicely into a stereo pedal setup or solo performance. What’s more, you can use the Infinity 3’s dual inputs to assign multiple mono sources to its dual loops — great for capturing multiple isolated sound sources and playing them back in sync. This looper also gives you 1/4-inch TRS Expression and Undo jacks, which you can use to control loop levels via an optional external expression pedal or assign undo functions to a dual-momentary remote switch.

Advanced MIDI capability

The Infinity 3 gives you a 5-pin MIDI port and advanced intelligent MIDI clock jitter correction, allowing you to incorporate its production potential into a whole world of MIDI devices. From DAWs to drum machines and pedals, the Infinity 3 is an essential tool for external device users.

How ’bout all those switches?

Beyond its impressive I/O and MIDI capabilities, the Infinity 3 gives you a wealth of ways to shape and capture audio.

  • 24kHz/12kHz: Reduces the internal 48kHz sample rate by one-half and one-quarter. Resultant loops will sound 1–2 octaves lower in pitch and will play back at half- or quarter-speed. These options are super useful for simulating bass instruments, creating rich vocal harmonics, and producing ultra-fat percussion sounds.
  • Cue Fade: Rather than loops stopping abruptly when the Stop footswitch is pressed, this option introduces a steady fade-out until the end of the loop cycle.
  • Arm/All: In Arm mode, the Stop footswitch ends playback only on the armed loop. In All mode, the Stop switch ends both loops. These options also apply to Play and Erase commands.
  • Stereo/Split: Stereo mode (default) records incoming audio in stereo, which is great for capturing stereo pedals, synths, and mixer feeds. Split mode assigns incoming audio from Input 1 to Loop 1 and incoming audio from Input 2 to Loop 2. This comes in handy when you want to capture multiple isolated sources and play them back in perfect sync.
  • Parallel/Series: This switch toggles parallel and series operation. In parallel mode, Loop 1 begins immediate playback when Loop 2 starts recording. In series mode, Loop 1 closes when Loop 2 enters recording and won’t play back until the next time you hit the Loop 1 footswitch.
  • Sync Multi: As with past Pigtronix loopers, one of the Infinity 3’s calling cards is its looping simplicity. This switch synchronizes the loop length of each overdub to align rhythms, percussion, and melodies in perfect harmony. This means no more tap dancing to get the perfect loop starts and stops.

Pigtronix Infinity 3 Looper Pedal Features:

  • Pigtronix’s most expressive looper pedal yet
  • Equal parts performance tool and songwriter’s sketchbook
  • Destined to become a permanent part of your live, rehearsal, and studio workflow
  • Dual stereo loops let you record verse and chorus loops independently
  • Stores up to 50 of your own pre-recorded loops (up to 3 hours in total length) for instant recall
  • Hi-resolution 24-bit/48kHz stereo recording with discrete analog limiter stages
  • Sync Multi eliminates the tap-dancing common to traditional looper pedals
  • 24kHz/12kHz switch gives incoming audio a 3-octave reach — great for bass instruments
  • Cue Fade gradually reduces loop levels when the Stop footswitch it pressed
  • Stereo/Split switch lets you capture multiple sources in perfect sync
  • 1/4-inch TRS Expression and Undo jacks

Tech Specs

  • Pedal Type: Looper
  • Looping Time: Up to 3 hours total
  • Presets: Up to 50 stored presets
  • Inputs: 2 x 1/4″
  • Outputs: 2 x 1/4″
  • MIDI I/O: Out
  • USB: 1 x Type Micro-B
  • Other I/O: 1 x 1/4″ (exp), 1 x 1/4″ (undo), 2 x 1/4″ (aux)
  • Bypass Switching: Buffered
  • Power Source: 18V DC power supply 
  • Height: 2.4″
  • Width: 7.4″
  • Depth: 5″
  • Weight: 1.2 lbs.
  • Model #: SPL3

Pigtronix

Shopping Cart
Scroll to Top