SKU: TEMBLOR T10 Categories: , , ,

$999.00

Availability: In stock

PreSonus Temblor T10 10″ Powered Studio Subwoofer – A solid foundation for mixing.

PreSonus Temblor T10 – Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

PreSonus Temblor T10 10″ Powered Studio Subwoofer – A solid foundation for mixing.

PreSonus Temblor T10 – Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Tight, clean, responsive bass.

The Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.

A perfect fit with your full-range monitors.

Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.

The central hub of your monitoring setup.

Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase.

The Temblor T10 also features a momentary footswitch (included), making it easy to compare your mix with or without sub-bass frequencies and ensure it will sound good on a wide variety of systems.

Accuracy defined.

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system. Hear the Temblor T10 at your favorite PreSonus® dealer.

Technical Specifications

Inputs 
 2- Balanced XLR

2- Balanced ¼” TRS

2- Unbalanced RCA

 

Outputs 
 2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼” TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)

 

Performance 
Frequency Response20 Hz – 200 Hz
Low Pass Filter Frequency50 – 130 Hz (variable)
Signal-to-Noise Ratio>98 dB (A weighted)
THD0.019% @ power <160W
Amplifier Power250W peak, 170W RMS
Power Consumption230W
Amplifier TypeClass AB
Peak SPL at 1m113 dB
Woofer10” glass-composite, front-firing
Acoustic PortFront-firing bass reflex
User Controls 
Input Gain Range-30 to +6 dB
Polarity Switch0° or 180°
Low Pass Filter Control50 Hz to 130 Hz
Ground Lift SwitchOn/Off
High Pass Filter SwitchOn/Off
Bypass FootswitchOn/Off

 

Protection 
 RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 
 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

 

Cabinet 
 Vinyl-laminated MDF

 

Physical 
Width12.6” (320 mm)
Depth15.75” (400 mm)
Height15.75” (400 mm)
Weight39.46 lbs (17.9 kg)

 

Brand

PreSonus

Shopping Cart
Scroll to Top