Rat Stands The Jazz Stand Portable Music Stand
Rat Stands The Jazz Stand - A professional music stand with a full range of height adjustment, industry standard stability and a full size music tray with pencil shelf. And yet, as a result of its unique design it unfolds in three moves from a flat pack no larger than the size of the tray. It does this with no knobs, no finger traps and no hassle; just three easy moves. A supporting range of flight cases, trolleys, carry bags and lights ensure that this is the ultimate travelling stand, both for individual musicians and touring groups.
Portable Conductor’s Stand
Rat Stands The Jazz Stand can be unfolded with its base pointing away from the user. It then makes a unique portable conductor’s stand.
When folded, Jazz Stands interlock to form an orderly pile.
When unfolded, the Jazz stand is adjusted by raising or lowering it to the desired height and leaving it there. Its friction joints ensure that it stays at the right height.
Strong, rigid and light
The anodized aluminium stem is very strong, rigid and light. This stand doesn’t sway, and yet can be adjusted smoothly and easily.
The injection moulded tray is virtually unbreakable; if bent, it springs back. The tray is made of a polymer which does not “ring” when knocked. It has smoothly rounded edges all over – safe to handle and kind to your instruments.
The tray has an additional shelf for pencils and small instruments. Friction locks automatically hold the tray at whatever angle you set. There are no knobs to fiddle with or lose, and it will never go slack.
Diecast aluminium legs with super-tough scratch resistant epoxy coating give enormous strength with low weight. Rubber feet preserve your floor and prevent clatter if the stand is knocked.
Jazz Stands nest next to each other when standing, saving space when stored.
Rat Stands The Jazz Stand can be unfolded with its base reversed to enable it to get right up to the chair of the player in front.
Rat Stands The Jazz Stand goes high enough for the trumpeter, yet low enough for the youngest cellist. The Jazz Stand’s reversible legs enable it to be used as a portable conductor’s stand.
The Jazz Stand – 69Q13
Structural parts: Aluminium
Coating: Anodised aluminium
Tray width: 503mm
Tray height: 323mm
Depth of tray lip: 57mm
Lowest height to bottom of score: 432mm
Tallest height to bottom of score: 1207mm
Nesting pitch: 120mm
Floor area occupied by 20 stands: 503mm x 435mm x 515mm *12 stands stacked