RCF HDL 6-A Active Line Array Module
The white RCF HDL 6-A Active Line Array Module from RCF is a 2-way active line array module designed for live sound reinforcement and installed sound applications. Powered by a 1400W 2-channel class-D amplifier, it features two 6″ neodymium woofers for a solid bass reproduction and a 1.7″ voice coil compression driver mounted on a precise 100 x 10° waveguide. The powerful DSP processes the sound including crossover, phase correction, limiting, and protection. The system accept female XLR input connectors and line-level signals from a mixing console or other signal source. The output XLR male connector provides a loop-trough for speaker’s daisy chaining. The volume knob controls the volume of the power amplifier. The control ranges from maximum attenuation to the maximum level (maximum output).
Features:
- Equipped with two aluminum rear handles for portability
- Features RCF transducers
- Integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped or spiral arrays
- Wooden reinforced composite polypropylene enclosure
- Integrated processing and cabling reduction
- Digital amplifier with switch mode power supply and DSP controlled input section with selectable presets
- Powered by a 1400W peak power digital amplifier, split 400W for the HF, and 1000W for the LF
- HF projection is adjusted by the button on the rear of the cabinets
- 2.0″ inside-outside voice coil
- Water-resistant fiber doped cone
- Polycotton M-roll surround
- High-power magnetic structure
- Inside/outside coil doubles the dissipation surface
- Adhesion area to the former is doubled
- ND 340 high-power compression driver
- 1.7″ voice coil with a crossover point of 900 Hz
- Coverage and dispersion control
- Edge wound voice coils
- Linear frequency response and maximum SPL output
Tech Specs:
| Processor | |
|---|---|
| Crossover Frequencies | 900 Hz |
| Protection | Thermal, RMS |
| Limiter | Soft limiter |
| Controls | HF correction |
| Amplifier | |
|---|---|
| Peak Power | Total: 1400 W High Frequencies: 400 W Low Frequencies: 1000 W |
| RMS Power | Total: 700 W High Frequencies: 200 W Low Frequencies: 500 W |
| Cooling | Convection |
| Connection | VDE connector in |
| Physical | |
|---|---|
| Hardware | Array fittings |
| Cabinet | Composite PP |
| Handles | 2 back |
| Dimensions | 9.3 x 18.5 x 15″ (23.7 x 47 x 37.7 cm) |
| Weight | 25.4 lb (11.5 kg) |
